10 ton transfer car for dies and molds parameters: Load Capacity: 2t~150t; Table size: can be customized; Wheel base: 1200~7000mm; Rail inner gauge: 1200~2000mm; Running speed: 0~25m/min; Running distance: 50~80m; Control mode: button / remote control; Get A Free Quote
Rail Roller Transfer Cart Battery Powered 10 Ton; 10T Capacity Coil Transfer Trolley; 50 Tons Battery Power Aluminum Coil Transfer Trolley For Met 10 Ton Battery Power Coil Transfer Car On Rail With U Deck F... 50 Ton Cable Power Steel Tube Transfer Trolley With U-Shaped... 20 Ton Sliding Wire Power Steel Coil Transfer Car For Pakist...
Trackless transfer car; Load capacity: 2-100t, available in battery powered version. Trackless transport cart is very safe and efficient for moving dies, coils, blanks and other heavy loads throughout the workshops as well as between crane bays. These can move in any direction, typically 360° turning in a small space.
10 ton rail transfer car for steel plant. The rail transfer vehicle is a flexible and powerful device. rail transfer cart is easy to use, compact in structure, high in work efficiency, and large in carrying capacity. It is widely used for material transportation in factories, industrial sites, warehouses, railway construction sites and many other places.
fin design high capacity high capacity high efficiency high efficiency turbulators yes no yes yes water flow rate, gpm 40 40 40 40 water velocity, ft/s 2.7 2.8 2.8 2.1 water pressure drop, ft. H2O 11.2 4.7 11.1 5.2 air pressure drop, in. H2O 0.81 0.95 0.71 0.71 cost of coil base - 30% base base + 8% base + 15% Figure 2. Water ΔT at part-load
This 50-metric ton capacity coil transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. The operator walks along with car, operating it from a hand-held pendant. Battery Powered. This 20,000-pound capacity transfer car is used to move stamping dies.
Rail transfer cart is an efficient material transporting cart powered by the rails, and the rails need to be insulated. We manufacture transfer carts with capacities ranging from 2 tons to over 150 tons, commonly used in machine shops, warehouses, metallurgical plants to move heavy loads throughout the facility or between crane bays.
10 ton overhead crane is a popular and cost-effective lifting equipment used in a variety of fields and sectors, such as manufacturing, mining, chemical industry and steel mills. The overhead crane 10 ton comes in four main configurations, including single girder, double girder, top running and underhung system.
The Heavy Duty standard for tire and service shops! Lifts from 4" to 19-1/2" Pinned steel saddle (1-1/8" stud) with rubber pad for added vehicle protection Rear-mounted 2-3/4" swivel casters for ease of maneuverability High strength steel yoke One-piece 50-1/4" padded handle parks upright Extra wide front casters for superior stability Safety valve prevents overload Flanged side plates for
20,000# UMI Coil Car-52" Bed Width-64" Coil O.D. Capacity-5" Bore Lift Cylinder-Approx. 18" Vertical Lift-Both Axles individually driven more View Details Contact Seller Request Price Expand
The heavy load battery-powered transfer vehicle adopts a DC motor, which is suitable for frequent use and has higher safety and maneuverability. It can meet the transportation environment with a high frequency of use and can be equipped with a hard-tooth surface reducer, which makes the maintenance of flat cars later simple.
Custom manufacturer of transfer cars including hopper carts for industrial, bulk transport and foundry applications. Cars include 5 ton to 300 ton load capacity and are equipped with suspensions, 12 in. to 30 in. dia. single and double flange steel wheels and semi-automatic and fully automatic control systems.
10 metric ton coil upender, pit mounted, with a motorized V-saddle & motorized pallet adjuster. 80 metric ton upender holds utility transformer coils on a cantilevered arm. If you can make it, we can move it.
Coil transfer cart is normally designed with V-decks to handle and transport coils and rolls. It is capable of handling heavy loads up to 150 tons. The material handling cart is a more cost-effective solution to transport heavy loads in your facility as compared to other equipment like fork lift truck.
Each aluminum coil can weigh anywhere from 8 to 12 tons. Meanwhile, some of the coiled aluminum strips are a mere 0.05 mm thick. They need to be handled very carefully in the midst of a fast-paced production environment. The coils are valuable. “I tell our drivers that damaging one of these coils is like damaging a brand new car,” shares
