20 to 120 Ton Units Trane 20 to 120 ton air-cooled condensers have an operating range of 40 F to 115 F, with a low ambient option down to 0 F. The control panel is factory-installed and wired to prevent potential damage and to provide weathertight protection. The control panel contains: • fan motor contactors. • fan cycling controls.
Slings for the industrial lifting and rigging industries from industry leader Lift-It Manufacturing Company, Inc. Call us at 909-469-2251 for all of your industrial lifting sling needs.
that can be adjusted to the desired load length. COIL TRANSFER CAR This 50-metric ton capacity coil transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. The operator walks along with car, operating it from a hand-held pendant. BATTERY POWERED TRANSFER CARS This 20,000-pound capacity transfer car
Cooling/Heating: Total Capacity (BTU/hr) = 4.5 x CFM x (H ewb – H ₁wb) Sensible Capacity (Btu/hr) = 1.08 x CFM x (T 1 db – Tedb) Latent Capacity (Btu/hr) = 0.68 x CFM x (Grains H 2 O removed per lb. air) Sensible Heat Ratio = Sensible Heat / Total Heat. Lb per hr H 2 0 Removed = 4.5 x CFM x Grains H 2 0 removed per lb. air7000.
Note: Length Tolerances - Single Part Wire Rope Slings - Standard length tolerance is plus or minus two rope diameters, or plus or minus 0.5% of Other fittings and latches are available upon request. 1. 1 Ton = 2,000 lbs. 2. Minimum length based on thimbled eye and eye hook. 77 * WARNING 6 x 19 EIP, IWRC 2-Leg Bridle 3-Leg Bridle 4-Leg Bridle
Jul 06, 2016 · Andy Bornschein took a different approach to building his ’68 Jeepster’s suspension. He got a good deal on a set of 16-inch-travel Fox coilovers and decided to build a suspension around them
Open coil cars carry coiled product that does not require protection from the elements. Cross members (Callahan bars) 6 per car are 19" wide and 79 1/2" long. The 100-ton coil car can accommodate a variety of coil sizes in the same load, from 30" to 84".
tire rolling radius, because the car’s weight compresses the tire 1/2”. Shock Installed Height This is the installed length of the shock absorber when the car is fully complete and ready to drive. That length should be within +or- 10% of the shock’s center of travel, so that 40% to 60% of the shock’s available bump travel has been used. You
Coil Transfer Cars made in the USA. Standard and custom lift models are available. Get in touch with a lift expert. Call Now: 1-888-711-5438
Refrigerator. Length 13.6 m x Width 2.45 m x Height 2.60 m. Volume: 86 cubic meters Tonnage: 20 tons. semi-Trailer is equipped with an Autonomous refrigeration unit, which allows to maintain a defined temperature from -20°C to 12°C on the whole route regardless of the outside temperature.
Contact Us. Steel Warehouse Headquarters 2722 West Tucker Drive South Bend, IN 46619 . Phone: 800-348-2529 Fax: 574-236-5154 Find More Locations . Mail Login
Many direct replacement lowering springs will lower a vehicle between 1 and 2-inches at the most, so if you want to go lower, coilover springs are the way to go. If a static in-the-weeds look is what you seek, coilover springs might be preferred, as they offer infinite ride height adjustability by mounting the coil spring right on an adjustable
We have built springs in Detroit, Michigan for 80 years, evolving with the auto industry while maintaining the original pride and craftsmanship of the golden era of classic cars. This is why our springs are in demand world-wide, from Norway to Australia. We ship anywhere, and you can order springs, shipping, and your attaching parts online
Product Description. The #1 choice for custom suspension systems, these shocks are available in various lengths, mounting styles and valving options. QA1 shocks instantly upgrade ride quality and performance. The shock and included hardware kit provide quick and easy ride height adjustability to get the perfect stance. YouTube. QA1.